Laser "1" Opaque Instructions
Produce photo-quality color dark Laser transfers with your laser printer.
This Laser 1 Opaque transfer paper is designed for color laser printers and is suitable for high-resolution photographs. You can image all colored fabrics made of cotton or cotton blend, as well as synthetic fabrics (polyester, nylon, etc.). Create your own t-shirts, caps, mouse pads, bags etc. with your LASER'1'Opaque.
Printing Equipment
Laser 1 Opaque Heat transfer paper works in both Color Laser Copiers and Color Laser Printers
Printing
Use single sheet feeding only
Copy/Print on the coated, rough side of the transfer paper in right reading (DO NOT MIRROR IMAGE) and heavy or extra heavy stock mode
Trim away the unprinted Laser1Opaque transfer paper around your image
Generally it is recommended to increase color brightness when copying /printing.
Use an image with rounded edges to avoid possible transfer paper corner liftoff after washing.
Transfer Laser one opaque heat transfer paper with a commercial heat press
Do NOT pre-heat t-shirt
Remove paper backing from transfer paper
Tip: Tear paper backing slightly. About 1/8 inch for easy removal of paper backing
Place imaged transfer film in desired position (FACE UP) on fabric
Cover imaged transfer film with enclosed silicon paper (OR Dazzle-Trans for a glossy finish)
Silicon paper can be used multiple times
Press at 375 degrees using medium pressure for 15 seconds (reduce time if using Dazzle-Trans)
Allow silicon/Dazzle-Trans to cool completely and peel when cool
Washing Instructions
Always turn textile inside out before washing
Machine wash warm
HANG DRY ONLY
Do not use harsh or bleaching detergents
After washing we recommend turning shirt inside out and ironing the image from the back.
Laser 1 Opaque is a quality heat transfer product to be used when printing with a laser printer or color copier. This Laser Opaque or Laser Dark transfer paper allows imaging onto dark substrates.
|
