Techni-Print 4.0 Color Laser Transfer Paper
Techni-Print 4.0
Produce photo-quality color transfers with your laser printer.
Techni-Print 4.0 t-shirt transfer paper allows you to transfer your photos and images to T-shirts, Sweatshirts, mouse pads, etc. Techni-Print transfer paper works in most high heat color laser printers and color laser copiers including those that do not use fuser oil (such as OkiData's and HP's.)
Storage and Imaging Conditions
Always store Techni-Print 4.0 transfer paper in the zip-lock bag provided until use. Best imaging results obtained at humidity levels between 50-60% RH.
Imaging
The unprinted (vs. side with back print) surface is the imaging side of the t-shirt transfer paper.
Make sure your image is flipped or that your have selected the Mirror Image or reverse image setting on your printer's driver.
Feed the Techni-Print 4.0 transfer paper according to the printer manufacturer's directions. (The side with “Techni-Print” on it is the backside). Any questions as to how to properly feed t-shirt transfer paper into your specific brand and model should be referred to the owner's manual or the machines manufacturer.
Check printer settings (Ultra heavy paper mode is recommended); single-sheet feeding is recommended.
Cut Out Design
As with any transfer paper it is recommended to trim the design before transferring.
For best results use an image with rounded edges to avoid corner liftoff after washing.
Preparing for Transfer and Application (Heat Transfer Press Application Required)
(The following is applicable for T-Shirts, Sweatshirts, and Mouse pads. Other substrates may require special instructions.)
Prepare heat transfer press to 375-400 degrees F. Be sure optimal temperature is attained before attempting to transfer your image.
Place your substrate (a white or light colored object of 100% cotton, 50/50 cotton/poly blends or 100% polyester) on the platen of the heat transfer press so that no seams or buttons prevent even pressure in the area to be transferred.
Press fabric first if necessary to ensure flatness and remove any moisture, then let cool.
Place T-shirt transfer paper with design facing down in desired position on fabric.
Using above recommended temperature, apply firm pressure (60 PSI or greater for 20-25 seconds.
HOT peel. Peel the transfer paper immediately after pressing (Caution transfer paper will be hot)
Information and Tips for Best Results
Do NOT apply to dark fabrics (use Laser "1" Opaque)
Do NOT image this paper in any Ink Jet printer
Use in a well-ventilated area.
Leave finished item for at least 24 hours before washing.
Fabrics may then be machine washed separately (inside out, DO NOT USE BLEACH or bleach additive detergent) in warm or cold water.
Do NOT use fabric softener
Dry at normal setting; do not dry clean.
Keep product in closed package between uses; store in a cool, dry place.
To determine proper printer settings for Techni-Print 4.0…Start with “Plain Paper” mode-if transfer paper does not fuse completely (toner flakes off) or if toner smears move to “Transparency” mode (this will slow the transfer paper down allowing more time to fuse). If still not satisfied try “Heavy paper” mode.
Thank you for choosing AllTransfers.com for your ALL your Transfer needs. If there is anything we can do to help please feel free to contact us and one of our experienced customer service staff will be happy to help.
|
